Ositech comm Trumpcard Data/Fax Modem Manual de usuario descargar pdf (Pagina 44)

4 - 12 Trumpcard 14400/28800 Modem

Section Four

In — Identification

Parameters 0 - 6

Default 0

Returns the product code, returns the checksum of the firmware ROM, or

computes the checksum of the firmware ROM and reports its error status.

The product code contains 3 digits. The checksum result consists of

three ASCII numeric characters followed by a carriage return and a line

feed. The error status line is either OK or ERROR.

Examples

ATI0 Reports the product code

ATI1 Reports the checksum computed on the firmware

ROM

ATI2 Performs a checksum on the firmware ROM and

indicates OK or ERROR

ATI3 Reports firmware manufacturer identification

ATI4 Reports product identification

ATI5 Reports country code

ATI6 Reports hardware configuration

Ln — Speaker Volume

Parameters 0, 1, 2, or 3

Default 2

Controls the internal speaker volume.

Examples

ATL0 Selects low speaker volume

ATL1 Selects low speaker volume

ATL2 Selects medium speaker volume

ATL3 Selects high speaker volume

Mn — Speaker Control

Parameters 0, 1, 2, or 3

Default 1

Selects when the speaker will be on or off.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 85 86

Sin comentarios

Ositech comm Trumpcard Data/Fax Modem Manual de usuario Pagina 44